Motorola WiFi 6E Mesh System, 5.4 Gbps speed | q14
Motorola WiFi 6E Mesh System, 5.4 Gbps speed | q14
- Description
- Tech Specs
-
unprecedented speed
Supports WiFi speeds up to 5.4 Gbps for over 100 connected devices. Works with fast home Internet plans without bottlenecking your speeds. A 2.5 Gbps WAN port enables true multi-gigabit speed.
next-gen WiFi 6E technology
WiFi 6E provides more capacity and lower latency—ideal for VR/AR and 8K streaming. New 6GHz band enables the latest WiFi 6E devices to connect at their full potential.
expandable mesh coverage
Say goodbye to dead zones and buffering. Blanket your whole home in fast, reliable WiFi up to 5,000 sqft.*
powerful app
Easily set up, manage, and secure your home network with the motosync app. Parental controls, threat scans, and ad blocking included.
tons of support
Comes with a 2-year warranty and free support from our US-based technicians.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.*Actual internet speeds depend on your ISP service plan. Maximum WiFi transmission rates are the physical rates derived from the 802.11 specifications. WiFi coverage range is derived from testing under ideal conditions. Phone not included.
-
PER DEVICE
WiFi Specs
- WiFi 6E Tri-band concurrent 2:2:2 (802.11ax)
- AXE5400
- Six (6) internal single-band antennas
- IEEE 802.11 a/b/g/n/ac/ax, 2x2 MU-MIMO
- WiFi 6 Performance (OFDMA, Beamforming, 1024-QAM)
-
Transmit Power (conducted):
- 2.4GHz: up to 27 dBm
- 5GHz: up to 25 dBm
- 6GHz: up to 23.5 dBm
-
Speed:
- Up to 574 Mbps** at 2.4 GHz
- Up to 2,400 Mbps** at 5.0 GHz
- Up to 2,400 Mbps** at 6.0 GHz
-
Band Channels and Frequencies:
- 2.4GHz: 2400-2473 MHz (CH 1-11, plus 12/13)†
- 5GHz: 5150-5835 MHz (CH 36-165)† including DFS
- 6GHz: 6105-7125 MHz (CH 33-233)†
-
Coverage:
- 1x Q14: 2,000 sqft.*
- 2x Q14: 3,500 sqft.*
- 3x Q14: 5,000 sqft.*
- Guest network support
Device management
- Band Steering
- Seamless AP Roaming
- Wireless Airtime Fairness (ATF)
- Smart Backhaul (Wired or Wireless)
- MU-MIMO
- Explicit Beamforming
Network management
- Optimized WiFi Channel Selection
- WPA2/WPA3 wireless security
- DHCP, Static IP, and PPPoE WAN support
- Firewall with DoS Attack Protection, SPI
- 64 client devices per WiFi band; up to 245 total client devices
Physical interface
- One (1) 2.5GbE Ethernet WAN/LAN port with 100/1000/2500BT auto negotiation
- One (1) 1GbE Ethernet LAN port with 10/100/1000BT auto negotiation
- AC Power input port
- Reset button
- WPS button
- Front Status LED: Power, WiFi, Internet
- Dimensions: 6.3” H x 6.1” D x 4.75” W
- Weight: 24.4 oz
- Ruggedized 4 kV surge protection
Accessories
- 12VDC, 2A, 24W AC adapter
- White 1.5m Cat 6 Ethernet cable
- Quick start guide
- motosync app
Certifications
- FCC part 15B, 15C, 15E, MPE, DFS, IEC 62368 with NRTL safety mark, CE
BUTTONS AND PORTS
WPS button
- Press to automatically connect wireless devices, without needing to enter the network password
WAN/LAN port
- Router: connect the Ethernet cable from this port to your internet device (e.g. modem)
- Extender: second LAN port to connect wired devices
LAN Port
- Connect wired devices
Power input
- Connect to the supplied power adapter
Reset button
- Press and hold for 10 seconds to reset the Q14 device to factory defaults
* WiFi coverage range is derived from testing under ideal conditions. Actual WiFi coverage may be lower due to environmental factors and client limitations.
** Maximum WiFi transmission rates are the physical rates derived from the 802.11 specifications. Actual WiFi transmission rate will be lower due to environmental factors, network conditions, and client limitations.
† Actual available channels and maximum output